Ioquake Wont recognize the mod?

23 replies [Last post]
29. July 2012 - 5:12
(*WASP*SH▲DOWKNIGHT)
Site administrator
haxxus's picture
Offline
Joined: May 2007
Posts:
US United States

For some reason i was playing in a 2.2b server ( Ioquake engine ) as always , and on rotation map needed some bsp file so i enabled download , it downloaded it and started to download some other files, i stoped the downloads and did /reconnect , and started to give me the please download the 2.2b excessiveplus mod error , My regular non ioquake works fine , but even after re installing a fresh Ioquake with a clean baseq3 and new e+ mod archive, it keeps giving me the same error ???? What could be the problem ??

Top
29. July 2012 - 5:25
#1
azrael
Xelair's picture
Offline
Joined: Oct 2007
Posts:
Re: Ioquake Wont recognize the mod?

You should be able to connect just fine by disabling auto-download.

Dangerously cheesy.

Top
29. July 2012 - 6:53
#2
(*WASP*SH▲DOWKNIGHT)
Site administrator
haxxus's picture
Offline
Joined: May 2007
Posts:
US United States
Re: Ioquake Wont recognize the mod?

off or on gives me the mod download error

Top
29. July 2012 - 9:18
#3
BOZO
Bozo's picture
Offline
Joined: Feb 2010
Posts:
Re: Ioquake Wont recognize the mod?

How can it give you "the download error" when you disabled automatic downloading? Sounds confusing!

I am running ioQuake with the latest E+ client and don't have any problem on any server. Can you name the server where you are experiencing problems? Then I could try to connect and see if I got the same problem.

Top
29. July 2012 - 18:13
#4
(*WASP*SH▲DOWKNIGHT)
Site administrator
haxxus's picture
Offline
Joined: May 2007
Posts:
US United States
Re: Ioquake Wont recognize the mod?

Any server ... beer , !ftag era .... for some reason beer will give me the error connecting , and era would let me join and then kick me out with that error , another weird thing is that even after re installing a fresh ioquake with new e+ folder , it seems to have my settings saved ...

Top
29. July 2012 - 18:36
#5
(*WASP*SH▲DOWKNIGHT)
Site administrator
haxxus's picture
Offline
Joined: May 2007
Posts:
US United States
Re: Ioquake Wont recognize the mod?

Ok , i uninstall my regular quake 3 , and ioquake , installed ioquake on a different hard drive and a fresh Clean e+ .. ... Same fkkkkinggggg error ....... OMG .... the only thing im reusing is pak0 . could that be the problem ?

Top
29. July 2012 - 18:39
#6
(*WASP*SH▲DOWKNIGHT)
Site administrator
haxxus's picture
Offline
Joined: May 2007
Posts:
US United States
Re: Ioquake Wont recognize the mod?

Ok more info , i could get in HIszy saerver and i dont get the error , And my Tag shows even though i have everything reinstalled fresh ? .... How could this be .. ... Also im using 2.2b ... Hiszy is 2.0 right ? . . Whats going on .....

Top
29. July 2012 - 19:00
#7
(*WASP*SH▲DOWKNIGHT)
Site administrator
haxxus's picture
Offline
Joined: May 2007
Posts:
US United States
Re: Ioquake Wont recognize the mod?

Another thing i found , if you open the game for the first time and join a server , this creates a q3config.cfg in both your mod and baseq3 right ? Well is not doing it ..... And at the same time is like loading one from some were because my tag shows and the screen set up is there ... and there is no other q3config around ....

Top
29. July 2012 - 20:39
#8
Rayden was here
georgekotz's picture
Offline
Joined: May 2010
Posts:
Re: Ioquake Wont recognize the mod?

You make it toooooo complicated now Big grin

Real life is more important then Virtual life
Dont forget that

Top
29. July 2012 - 20:51
#9
epsiplayer
THE ONE AND ONLY
intact-epsilon's picture
Offline
Joined: Dec 2006
Posts:
Re: Ioquake Wont recognize the mod?

Could you specify the text of the error message?
____________
epsislow


Top
29. July 2012 - 21:04
#10
BOZO
Bozo's picture
Offline
Joined: Feb 2010
Posts:
Re: Ioquake Wont recognize the mod?

Even better: Post the qconsole.log file here but please attach them to your post. You find the logfile in your baseq3 folder.

Top