Q3 Brightness issue
Hi,
I have an serious problem with my q3arena. When i play it its like i have no brightness and its very dark, but when i do the alt+enter thing (put it in window mode) my brightness is ok. I have putted a 2 pictures for example. Does anyone knows what to do, did anyone have a similar problem?
Tnx.
Picture 1 normal mode, dark screen no brightness.
[img=http://img376.imageshack.us/img376/8273/q3dark2vc.th.jpg]
Picture 2 window mode, its all ok with brightness.
[img=http://img376.imageshack.us/img376/306/q3light4gj.th.jpg]
i recently have had problems with this, sometimes when i start q3 the brightness goes waaay down, but i can go back into the configurations menu and adjust it easilly..
r_gamma
r_mapoverbrightbits
Try to play with these 2 or just reexec your config if u c problems...
I had the same problem before...dont remmember excatly how I solved it,but maybe try different resolution and color mode (32 or 16).Is your windows color mode and q3 color mode the same? (32-32 bit f.e.)
r_ignorehwgamma
also when u switching betwen window and full scren mode sometimes yors gamma get f.. up then set to r_gamma 1, and set it again to value u like to have
do you have an ati card? I seem to recall after an update i had to turn of all the tray crap to get rid of it
WOW! The "r_ignore"-line fixed it!!
I had this problem since a year! Always solved it by switching the resolution in q3. <-Ugly 'cause it takes a lot of time. In the same way my second monitor gets a brightness which kills my eyes.. :roll:
Thanks for your advise! Now Q3 is never gettin' this damn' grey-filter and my second monitor works perfect, too (cause now it is keeping its own gamma)
\:D/ //can't believe it right now this problem is fixed... THX!
Thx alot for u help. The r_ignore... command helped and now its ok.
P.S. Onec again tnx for help because the brightness thing was killing my eyes big time
<3
Sakati your back?? havent seen your for a while. what name do you play under?
I tried with brightness and it doesnt work, it doesnt matter if i max it or lower it its the same thing and even tryed with lightmap/vertex.