Q3 Stutter Problem need help ><

5 replies [Last post]
18. May 2006 - 12:55
SERLANT
Serlant's picture
Offline
Joined: Feb 2006
Posts:

well.... my problem is after i installed some new components in my computer i am having the problem of Q3 freezing completely (including a little sound looping) for about half a second then it resumes....and this happens every 2 or 3 mins and continues for the duration of my game.
my specs are:
Pentium D 805 2x2.66ghz 2x1mb cache 533 fsb
Elitegroup P4M800-M7
2x512Mb DDR400 non matched pair
ATI Radeon 9800pro 128mb 256-bit
samsung spinpoint 80gb 7200rpm 2mb cache

old specs
Pentium 4 3ghzHT 512k cache 800fsb
gigabyte 8S661FXMP-RZ
2x512Mb DDR400 non matched pair
ATI Radeon 9800pro 128mb 256-bit
samsung spinpoint 80gb 7200rpm 2mb cache

any help would be very appreciated as its killing my game Sad
Edit: and i dont think my overclock is the problem before you point that out as it happened aswell before i started o/cing


A common mistake that people make when trying to design something completely
foolproof is to underestimate the ingenuity of complete fools. - Douglas Adams

Rig1:
Core 2Duo E6300 ~3ghz 2gigs DDR2 533@ 644mhz XFX 8800GT 700/1000
Rig2:
AMD X2 3800+(939), ~2.8GHz Scythe Ninja
2GB DDR400
NVIDIA GeForce 7900 GS (450/660)~(600/740) zalman VF900-Cu

Top
18. May 2006 - 13:17
#1
{D*R*T} FAITH
Faith's picture
Offline
Joined: Dec 2004
Posts:
Q3 Stutter Problem need help ><

hum :}

1. drivers?
>update
2. maybe cpu is overheating and its lovering its speed?
>check cooler
3. Adware/Virus
>scan hdds :}

Top
18. May 2006 - 13:25
#2
madbringer
Madbringer's picture
Offline
Joined: Jan 2006
Posts:
Q3 Stutter Problem need help ><

Hmm, is this happening in other applications that use 3d hardware acceleration ? If yes, it's probably one of the things Faith pointed out. If it's a q3 only problem...

1. Try moving/deleting ALL your q3config files and run quake, letting it reset game settings to default.

2. If that won't work try to put this line in your q3config (either the one located in baseq3 folder or the one located in excessiveplus folder):
seta com_hunkmegs "256"

3. If the problem persists still, you'll probably want to reinstall your Q3.

Top
19. May 2006 - 20:05
#3
SERLANT
Serlant's picture
Offline
Joined: Feb 2006
Posts:
Q3 Stutter Problem need help ><

ill try the drivers Big grin thats the only other thing ...cs: s works flawlessly. i turned my overclock back to stock and its still happening...i got an aftermarket heatsink yesterday and it sits at about 40 idle 50 load so i dont think so....my HD reads 28 and my rams at stock speeds with relaxed timings now Worried if drivers dont work ill try moving Q3 but i dont got q3 install CD Worried


A common mistake that people make when trying to design something completely
foolproof is to underestimate the ingenuity of complete fools. - Douglas Adams

Rig1:
Core 2Duo E6300 ~3ghz 2gigs DDR2 533@ 644mhz XFX 8800GT 700/1000
Rig2:
AMD X2 3800+(939), ~2.8GHz Scythe Ninja
2GB DDR400
NVIDIA GeForce 7900 GS (450/660)~(600/740) zalman VF900-Cu

Top
20. May 2006 - 8:44
#4
x.foksie'loy.drt?
foksie's picture
Offline
Joined: Jun 2005
Posts:
Q3 Stutter Problem need help ><

well on the other hand quake3 is opengl and css is direct3d. so it can still be the drivers.

but it is possible you have some wierd leftovers in cfg. check what graphics are declared in it.

I am proud of spreading a pirated Excessive Plus version and claim to be the original author, yay!

Top
20. May 2006 - 11:38
#5
gen.X.rudz
rudz's picture
Offline
Joined: Dec 2003
Posts:
Q3 Stutter Problem need help ><

I asume you are using Windows XP ?
As i have a simular graphics card it could be the drivers.
I have tried Catalyst 6.4 a couple of times and they seem to screw every game up ive tried. Best results i get is from Catalyst 6.3.
I think this might be the same if you are using Windows 2000.

Cat 6.4 also screws up the latency for the graphics port, but changing that to optimum value of 64 is not helping either. So that can also be ruled out.

Hope it helps.

Something....

Top