User login
Synchronizing mx518 sens with intelli 3
6. October 2009 - 9:56
Hey
I know that there are some crazy ppl that don’t do anything else than just sens testing etc. I have a smaller problem here.
I just bought the MS Intelli Explorer 3.0. What I would like 2 know: Is there are any easy way to get THE SAME sens as my old MX5.18 to Intelli 3.0 ?
(sure I know this is hard because they are different brands, dpis etc)
Should I start all over with the sens testing? Main problem here is that they are DIFFERENT brands and the feel/dpi is of course not the same. Sure I guess I could measure and check how many cm I need for let’s say 180 Turn but still its kind of a subjective attempt.
ALL Suggestions & replay will be very kind from you 
PS
BIG THX 2 PARA for correcting the post 
RegardZ
IMPREZiVE
6. October 2009 - 10:24
#1
Synchronizing mx518 sens with intelli 3
Hmm, will be hard to get the exact sensitivity, since ie 3.0 have somewhat different response curve (Negative accel.)
I would guess sens 0.7 @ 1800 dpi (Stock pitch/yaw, notch 6 in windows) would be something like 3.5-4 on ie 3.0
The only way to make sure is to do as u said - Test test and test.
6. October 2009 - 10:27
#2
Synchronizing mx518 sens with intelli 3
I can't help with that mouse, but congratz new mouse (even if some says it sux) 
Wanna avoid seeying mow, skull & co 
Check this peacefull place
6. October 2009 - 14:50
#4
Germany
Synchronizing mx518 sens with intelli 3
first of all, set up ur mouse like partially written here in the mouse guid.
http://www.overclock.net/computer-peripherals/173255-cs-s-mouse-optimization-guide.html
i stepped over it by browsing the esl mouse test 2007, its a pretty solid guid, though not optimised for q3.
set up ur mouse so windows does not alter sensitivity.
and then use the sens * dpi old mouse/dpi new mouse formula.
hf
6. October 2009 - 14:54
#5
![mow Q [EN]](/files/screenname/8646b528fbbe1090dc61e0f29405d1b3.webp "mow Q [EN]"){kind=small}
Synchronizing mx518 sens with intelli 3
Do u still have ur old mouse?. Just test how many cm u need for a 180 or 360 ° turn. And than go and test it for ur new mouse until u need the same cm.
6. October 2009 - 15:32
#6
United Kingdom
Synchronizing mx518 sens with intelli 3
wrote:first of all, set up ur mouse like partially written here in the mouse guid.
http://www.overclock.net/computer-peripherals/173255-cs-s-mouse-optimization-guide.html
i stepped over it by browsing the esl mouse test 2007, its a pretty solid guid, though not optimised for q3.
set up ur mouse so windows does not alter sensitivity.
and then use the sens * dpi old mouse/dpi new mouse formula.
hf
much apreciated
Deathadder | Goliathus Speed | Filco Majestouch | i7 3770 | 16GB | GTX 1080 | Xonar Essence ST | Sennheiser HD598
6. October 2009 - 20:16
#7
Synchronizing mx518 sens with intelli 3
wrote:first of all, set up ur mouse like partially written here in the mouse guid.
http://www.overclock.net/computer-peripherals/173255-cs-s-mouse-optimization-guide.html
i stepped over it by browsing the esl mouse test 2007, its a pretty solid guid, though not optimised for q3.
set up ur mouse so windows does not alter sensitivity.
and then use the sens * dpi old mouse/dpi new mouse formula.
hf
Intressting Skull BIG thx for that
wrote:Do u still have ur old mouse?. Just test how many cm u need for a 180 or 360 ° turn. And than go and test it for ur new mouse until u need the same cm.
Yeah i still gott the old mouse
This was something that i was thinking earlier mow
Thx all for the replays very kind
Regardz
IMPREZiVE
6. October 2009 - 21:37
#8
Synchronizing mx518 sens with intelli 3
Well Skull I have 2 say BIG fucking THX again
I have read ALL the whole guide line and i have 2 say it was very intressting, it took 1h 30min actually
There are some smaller things there that i still dont fully understand but iff i read it 1 more time im sure i gett hang off it
Regards
IMPREZiVE
7. October 2009 - 10:29
#9
Synchronizing mx518 sens with intelli 3
wrote:first of all, set up ur mouse like partially written here in the mouse guid.
http://www.overclock.net/computer-peripherals/173255-cs-s-mouse-optimization-guide.html
stepped over it by browsing the esl mouse test 2007, its a pretty solid guid, though not optimised for q3.
set up ur mouse so windows does not alter sensitivity.
and then use the sens * dpi old mouse/dpi new mouse formula.
hf
this is literature of the mouse config,
i think this thread must be top on the Client Setup & Configuration Help forum
thanx for all share
yo imp thanx u too for make it this motherf* shi*
Shout 13:28:16
: Steff, traitor. That’s a valid message
: Enter a valid Message
: Me, lol
: hello!
: I hope you had a good reason to be absent. Get well soon, my friend.
: Impressive
: I am half Russian and half black. I'm black on the bottom half. Don't forget to lubricate your ass
: ok, bring it on analbolic hohol
: Come tomorrow to watch my battle with ShadyХУЙ at SexyFraggers 8 on central european, 22:00 Moscow time. He said he would win because he was a deft monkey. ХУЙ don't forget to put on makeup, I'll record us on video. You must be beautiful.
: broheim it is oke!!! I saw Moldova elections on the news, and referendum before that. HOPE life will get better (but nothing ever changes)
Who's online
There are currently 0 users and 3 guests online.
TY very much for the INFO help over MSN Lakken :thumbleft:
RegardZ
IMPREZiVE
Skype:
https://www.youtube.com/channel/UCKcseix0LwXD_y762mDB00g
https://www.facebook.com/xf1ghter
http://instagram.com/xf1ghterhttps://twitter.com/xf1ghter_
http://steamcommunity.com/id/xf1ghter_
http://www.quakelive.com/#!profile/summary/xf1ghter