CPU FAN Cooling problem
I would like to ask anyone who got same cpu cooler as me that I bought some time ago
Its a CPU Cooler Hyper 101i PWM with 4 or 3 pins I readed that 4 pins are for auto PWM control
but my fan speed is same around 860-920 RPM, it doesnt change when cpu gain is even at 100% and temperatures raises up to 85C
On the beggining the FAN control was working fine, when cpu gain was higher rotations raised aswel
Something happened past those months and I am not sure what exactly.
got Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz
I am using SpeedFan 4.43 to monitor the system activity, maybe someone knows better progz to do the same but with full control of the Fan Rotation speed, I want to set it for full speed or atleast 80%, this program doesnt do anything even when option for 'Automatic fan speed' is enabled, I disabled the Q-Fan speed at BIOS and nothing, so I enabled it again and the option with performance appeared below so I set that to Performance level, means it should work at full speed all the time especially when cpu is at 100% of use.
PWM is just one more wire for controlling rpm. But rpm controls mobo not fan so the easiest way how to set pwm sensitivity is in entering bios and set q-fan to performance mode
I have very bad experience with similar software like speedfan. It simply doesnt work or makes system unstable. Iam using software from Asus for controlling fans but its propably only for Sabertooth mobos
or buy for 5 dollar on ebay a new cooler
how about using a manual controller for you cooler? i have a P5K and the free speedfan prog not working for me.
Hi Camel, mby u need something like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119248
Have you tried updating ur bios?
wrote:how about using a manual controller for you cooler? i have a P5K and the free speedfan prog not working for me.I dont have anything like that or I dont know if I would be able to buy such thing for that cooler
i use smth like that and it's working well with other cpu fan. good luck.
NB-FanspeedController --> for 5 EUR http://www.ebay.de/itm/NOISEBLOCKER-Fan-Speed-Controller-NB-Fanspeed-Controler-Luftersteuerung-Lufter-/160785391586?pt=DE_Computing_L%C3%BCfter_K%C3%BChlk%C3%B6rperhalter_Zub_&hash=item256f8e5fe2
Titan TTC- CS01 Speed Controller --> for 5 EUR http://www.ebay.de/itm/Titan-TTC-CS01-Speed-Controller-Kuhler-Luftersteuerung-NEU-OVP-Fortuna-Trade-/130593252018?pt=DE_Computing_L%C3%BCfter_K%C3%BChlk%C3%B6rperhalter_Zub_&hash=item1e67f6e2b2
and here your BLACKBOX
Zalman FAN MATE 2 --> for 6 EUR http://www.ebay.de/itm/Zalman-Luftersteuerung-FAN-MATE-2-einfach-leise-stellen-/220733836146?pt=DE_Computing_L%C3%BCfter_K%C3%BChlk%C3%B6rperhalter_Zub_&hash=item3364c30b72
The cooler seems to work fine, Its a 4 pin connector with PWM control but the motheboard seems does not control it at all, when cpu gain rises it do not raise the fan rotation speed, so I unplugged the connector from 4 pin input to one from two other fan inputs for only 3 pins inputs and the cpu fan worked at full speed I think because was much louder in work, but the only positive things from that was faster cooling when the cpu gain was minimal and while running q3 temperatures raised up to 75C but not on 100% cpu use not much difference while with lower RPM's
In BIOS Q-Fan is set to 'Performance mode' means it will raise up RPM's when CPU gain is higher, but it do not do that at all, what can be the cause of that?
I also set some options in the SpeedFan 4.46 to raise up RPM when temeprature is more than ex. 60C but it also doesnt work at all
my motherboard (mobo ) is:
P5KPL-CM
http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM