User login
[ r e w i e v ] razer deathadder - © KO archives
29. June 2007 - 16:34
#12
[ r e w i e v ] razer deathadder - © KO archives
Concerning grip problems,I see sanding of the sides..
Maybe u heard about steel grip?
30. July 2007 - 23:55
#13
[ r e w i e v ] razer deathadder - © KO archives
unfortunaly im cant find this thing in poland, but im alredy thinked about project wich can have beter results that this steel grip and im not talking about curent update of main topic 
yeah the main topic were UPDATED so read up for more infos and pictures
31. July 2007 - 0:09
#14
[ r e w i e v ] razer deathadder - © KO archives
Ye I know what u talking about,its not available here also.Luckily I had taker who sent it to me from norway (thx once again) but I wasnt really thrilled with it.If u sweat alot,that material wont help u,it will only pile up sweat in time and its not even that solid material,if u scratch it with ur nails it will begin to fall apart.If u find some solution that could be homemade by everyone (if ur not planning to patent it and sell it 
pls share it 
btw good job concerning last update...nice work.
7. August 2007 - 9:39
#15
[ r e w i e v ] razer deathadder - © KO archives
wrote:
beside im changed mousepad from qck+ to corepad eyepad and traction los problem wanished, im will test this more deply couse im only played once on new pad to confirm this informations. if u dont know corepad eye is look familiar to qck+ but so far it does look like its have serious impact on a sensor traction
dunno if im started to move hand faster or its cause the pad isint brand new and fully clean but the problem with traction loss backed to me like boomerang, its still beter than was on qck+ but somtimes mouse does loss traction
after some time im also noticed mouse is more sensitive for tiny touches and its harder aim on it as on IE or MX510, it requires more focus couse croshair act like bit faster while precise aiming as it hapens on IE or MX510, u have the same amount of cm to travel by both mouses then u will fell that while u aiming on long distance DA is way more sensitve and it dosent help in aiming, croshair move more. its also harder for me to snap to target after 180degres turn than on IE or MX510
after the tweak im seriously wonder if it should not be mine primary mouse couse now its have the best shape for me throught these 3 mouses but what im pointed out up there dosent allow me to use it
7. August 2007 - 14:18
#16
[ r e w i e v ] razer deathadder - © KO archives
Since you opened it up, is there anything in the insides that could be done (like just removed or something) from the back to put the weight more in the center? I mean, when i lift the mouse in what I feel is "the middle" of the mouse on both sides, it is extremely much heavier in the back than in front, and I'd like it to be (at least more) balanced. Obviously I don't want to achieve that by putting more weight in front either, better leave it be then
I didn't really see anything like that in the pictures though, just asking to make sure...
-edit-
Oh, and on a sidenote One thing I'd really want to see is a video of you (HQ) playing 
Atleast just so mouse and monitor is visible. It's cool (and rare) to see good play with such super low sensitivity, I can only remember one at the moment, a short clip "mew" uploaded... Would like to see LuGia too They have like 50 cm turns aswell (and for some reason their crosshair moves really unsmooth in demos, I wonder why that is. Maybe some kind of tradeoff to get their mice to not skip at those speeds or something, dunno).
(Just came to think of this as I recently saw roger1's QuakeCon videos, awesome to see Toxic play with his aim)
8. August 2007 - 13:27
#17
[ r e w i e v ] razer deathadder - © KO archives
u can do nothing inside, hm looked again on it front butons pcb and wheel mechanism are mounted on top part of the mouse box and sensor pcb is located on center part in mouse meybe a bit backward but it should have balanced weight, meybe the wrong fel u got is caused cuz butons are mounted on top of mouse not on down its change balance betwen up and down
i dosent have eny camera to record it
8. August 2007 - 13:45
#18
[ r e w i e v ] razer deathadder - © KO archives
Torz you mean this video
http://www.esreality.com/files/movies/2006/mew_playing_06.avi
Awesome indeed.
If you have some others plz post a link.
8. August 2007 - 15:55
#19
Germany
[ r e w i e v ] razer deathadder - © KO archives
Holy shit, that's crazy. 
8. August 2007 - 17:28
#20
[ r e w i e v ] razer deathadder - © KO archives
HQ did u think about combining electronics of 510 with DA case? :]
@Torzelan: Do u mean that very short moves with the crosshair like the mouse is lagging? I saw that in fatal1ty and some other demos,could never understand whats happening there.
Shout 23:53:04
: Steff, traitor. That’s a valid message
: Enter a valid Message
: Me, lol
: hello!
: I hope you had a good reason to be absent. Get well soon, my friend.
: Impressive
: I am half Russian and half black. I'm black on the bottom half. Don't forget to lubricate your ass
: ok, bring it on analbolic hohol
: Come tomorrow to watch my battle with ShadyХУЙ at SexyFraggers 8 on central european, 22:00 Moscow time. He said he would win because he was a deft monkey. ХУЙ don't forget to put on makeup, I'll record us on video. You must be beautiful.
: broheim it is oke!!! I saw Moldova elections on the news, and referendum before that. HOPE life will get better (but nothing ever changes)
Who's online
There are currently 1 user and 19 guests online.
first post was --- UPTATED --- read up and see pictures of wheel mechanism
btw from 21 jun new firmware is awilable 1.21, btw beware first try crushed mine pc, so beter disabele all in bacground